Types of insulators used in transmission lines ?

Disc insulators are made for 11 KV voltage. But the biggest advantage is that it can be used up to such a high voltage level as many discs are connected.

[{ "selector": ".mbbzs-a", "duration": "500ms", "fill": "forwards", "delay": "0ms", "keyframes": [ {"offset": 0, "transform": "translateY(calc(600px - 4px))", "opacity": "1"}, {"offset": 1, "transform": "translateY(0)", "opacity": "1"} ] }]

The dielectric strength of the glass insulator is 140KV/cm. Glass insulator does not heat up quickly.

Your Page! [{ "selector": ".soqkl-a", "duration": "500ms", "fill": "forwards", "delay": "0ms", "keyframes": [ {"offset": 0, "opacity": 0}, {"offset": 1, "opacity": "1"} ] }]

Pin insulators are made from ceramic, rubber, silicone, polymer, and porcelain. Pin insulators are used from 415 volts to 33 KV.

Your Page! [{ "selector": ".zfwzo-a", "duration": "500ms", "fill": "forwards", "delay": "0ms", "keyframes": [ {"offset": 0, "opacity": 0}, {"offset": 1, "opacity": "1"} ] }]

We can use a Post insulator up to 1100KV voltage level.

[{ "selector": ".lpbod-a", "duration": "500ms", "fill": "forwards", "delay": "0ms", "keyframes": [ {"offset": 0, "opacity": 0}, {"offset": 1, "opacity": "1"} ] }]

shackle insulator can be applied both horizontally and vertically. This type of insulator is used in low voltage.

Porcelain is a great insulation material.

1) This type of insulator is very light in weight.
2) Fitting this type of insulator is very easy.

Your Page! [{ "selector": ".qgnul-a", "duration": "500ms", "fill": "forwards", "delay": "0ms", "keyframes": [ {"offset": 0, "opacity": 0}, {"offset": 1, "opacity": "1"} ] }]

Types of insulators used in transmission lines ?

Disc insulators are made for 11 KV voltage. But the biggest advantage is that it can be used up to such a high voltage level as many discs are connected.

The dielectric strength of the glass insulator is 140KV/cm. Glass insulator does not heat up quickly.

Pin insulators are made from ceramic, rubber, silicone, polymer, and porcelain. Pin insulators are used from 415 volts to 33 KV.

We can use a Post insulator up to 1100KV voltage level.

shackle insulator can be applied both horizontally and vertically. This type of insulator is used in low voltage.

Porcelain is a great insulation material.

All types of voltage level insulators are made of porcelain.

1) This type of insulator is very light in weight.
2) Fitting this type of insulator is very easy.

If the wire has to be twisted or bent in the overhead line, then a letter stay type insulator is installed at such a place.

This insulator is prepared by adding a disc of glass or porcelain insulator. This insulator isolates and supports the line conductor.

Types of insulators used in transmission lines ?

Disc insulators are made for 11 KV voltage. But the biggest advantage is that it can be used up to such a high voltage level as many discs are connected.

The dielectric strength of the glass insulator is 140KV/cm. Glass insulator does not heat up quickly.

Pin insulators are made from ceramic, rubber, silicone, polymer, and porcelain. Pin insulators are used from 415 volts to 33 KV.

We can use a Post insulator up to 1100KV voltage level.

shackle insulator can be applied both horizontally and vertically. This type of insulator is used in low voltage.

Porcelain is a great insulation material.

All types of voltage level insulators are made of porcelain.

1) This type of insulator is very light in weight.2) Fitting this type of insulator is very easy.

If the wire has to be twisted or bent in the overhead line, then a letter stay type insulator is installed at such a place.

This insulator is prepared by adding a disc of glass or porcelain insulator. This insulator isolates and supports the line conductor.

1) This type of insulator is very light in weight.
2) Fitting this type of insulator is very easy.